Self-Diagnostic Mode - Panasonic SA-AKX72PH Service Manual

6.4.

Self-Diagnostic Mode

Service Mode
To enter into Service Mode
Error Code Checking the records for Error Code.
History
If there's no error code.Display will
remain as [T
To check for following:
Software
1)System Version.
Display
Version.
2)Jupiter Micro-processor Version.
3) Opecon Version.
Display of AD To check the AD input value
value of main
body key
USB Error
To check for USB error Codes.
Code History
]
XX: AN2 input value (2 hexadecimal
value digits) --> KEY1
YY: AN3 input value (2 hexadecimal
value digits) --> KEY2
ZZ: AN4 input value (2 hexadecimal
value digits) --> KEY3
AN2 AN3 AN4
History
number
20
In CD Mode:
1.Press and hold [ ] button on
main unit for 2 secs.
2.Do not release [ ] button, press
and hold [ / ] on the remote
control for 2 secs.
3.To exit, press [POWER,
/l
button on main unit.
In Service Mode:
1.Press button [1] on remote control.
2.To clear history,press & hold [0] for
5 seconds or more
In Service Mode:
1.Press button [2] on remote control.
2.Press button [2] on remote control.
3.Press button [2] button on remote
control.
In Service Mode:
1.Press button [ 4 ] on remote
control for 2 secs.
In Service Mode:
1.Press button [5] on remote control.
2.To clear history,press & hold [0] for
5 seconds or more.
]