Toyota Celica 1997 Owner's Manual page 88

To cancel all of the changed EQ setting:
Push and hold in "EQ" until you hear a
third beep.
FADE
This knob lets you adjust the balance be-
tween the front and rear speakers.
Push "TREB/FADE" so that it pops out of
its retracted position. Pull out the knob.
Turn the knob to adjust the front/rear bal-
ance. Push the knob back into its re-
tracted position.
MID (Mid-range)
This knob lets you adjust the mid-range
level.
Push "MID/BAL" knob so that it pops out
of its retracted position. Turn the knob to
adjust the mid-range level. Push the knob
back into its retracted position.
MTL (Metal) display
If a metal or chrome equivalent cassette
tape is put in the cassette player, the play-
er will automatically adapt to it and "MTL"
will appear on the display.
92
WWW.MANUALS.WS
PROG (Program)
Push "PROG" to select the other side of
a cassette tape. The display indicates
which side is currently selected (" " indi-
cates top side, "v" indicates bottom side).
Auto-reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
PWR/VOL (Power/Volume)
Push "PWR/VOL" to turn the audio sys-
tem on and off. Turn "PWR/VOL" to adjust
the volume.
RAND (Random)
The random feature allows you to listen to
the tracks on a compact disc in random or-
der.
When you push "RAND", "RAND" will ap-
pear on the display and the player will play
the tracks in random order. Push the but-
ton again to turn off the random feature.
WWW.MANUALS.WS
RM (Radio Monitor)
The radio monitor feature allows you to
listen to the radio while a cassette is being
rewound or fast forwarded.
Push "RM". "RM" will appear on the dis-
play. Any time you are rewinding or fast
forwarding a cassette tape, the radio will
play the station that was set most recent-
ly. (You can not change the radio station
unless you switch out of the cassette play-
er function.)
Push "RM" again to turn off the RM fea-
ture.
RPT (Repeat)
The repeat feature automatically replays
the current cassette or compact disc
track.
Push "RPT" while the track is playing.
"RPT" will appear on the display. When
the track ends, it will automatically be re-
wound and replayed. This process will be
continued until you push the button again
to turn off the repeat feature.
Cassettes—There must be at least 3
seconds of blank space between tracks in
order for the repeat feature to work
correctly.