—Top strap anchors and
locations (Coupe on liftback
only)
WWW.MANUALS.WS
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten
the top strap.
See the following instructions to install the
anchor bracket.
WWW.MANUALS.WS
Coupe—On the filler panel behind the
rear seat
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the filler panel.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5–24.7 N m (1.68–2.52 kgf-
m, 12.2–18.2 ft lbf).
45