Toyota Celica 1997 Owner's Manual page 81

The APS number you select can be higher
than the number of tracks remaining on
the current cassettte side. After the begin-
ning or end of the tape is reached, the
player will automatically reverse sides
and rewind or fast forward the additional
number of tracks.
There must be at least 3 seconds of blank
space between tracks in order for the APS
feature to work correctly. In addition, the
APS feature may not work well with some
spoken word, live, or classical recordings.
BAL (Balance)
This knob lets you adjust the balance be-
tween the right and left speakers.
Types 2-1 and 2-3—Pull out "PWR/VOL/
BAL". Turn the knob to adjust the balance.
Push the knob back into its normal posi-
tion.
Type 2-2—Push "BAL/FADE" so that it
pops out of its retracted position. Turn the
knob to adjust the balance. Push the knob
back into its retracted position.
BASS
This knob lets you adjust the bass level.
Push "BASS/TREB" so that it pops out of
its retracted position. Turn the knob to ad-
just the bass. Push the knob back into its
retracted position.
WWW.MANUALS.WS
Dolby NR*
Type 2-1 and 2-2
If you are listening to a tape that was re-
corded with Dolby
push the button marked with the
double-D symbol. The double-D symbol
will appear on the display. Push the button
again to turn off Dolby NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on or
off according to the mode used for record-
ing the tape.
*: Dolby noise reduction manufactured under license from Dolby Lab-
oratories Licensing Corporation. "DOLBY" and the double D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Dolby B C NR*
Type 2-3 only
If you are listening to a tape that was re-
cored with Dolby B or C Noise Reduc-
tion, push the button marked with the
double-D symbol until the appropriate
symbol appears on the display. To turn off
Dolby NR, push the button until the sym-
bol disappears from the display.
WWW.MANUALS.WS
The Dolby B NR mode reduces tape noise
by about 10 dB. The Dolby C NR mode re-
duces tape noise by another 10 dB, or
about 20 dB total. For best sound repro-
Noise Reduction,
duction, select the same NR mode that
was used to record the tape.
*: Dolby noise reduction manufactured under license from Dolby Lab-
oratories Licensing Corporation. "DOLBY" and the double D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
EJECT
Type 2-2 only
Push "EJECT" to eject a cassette.
After you turn the ignition to "LOCK", you
will be able to eject a cassette but you will
not be able to reinsert it.
FADE
This knob lets you adjust the balance be-
tween the front and rear speakers.
Type 2-1 and 2-3—Move the "FADE" ring
around "PWR/VOL" to adjust the balance
between the front and rear speakers.
Push the "BAL/FADE" knob so that it pops
out of its retracted position. Pull out the
knob. Turn the knob to adjust the front/
rear balance. Push the knob back into its
retracted position.
85