RCA RLDED2952A User Manual page 33

Problems Solutions
SWITCHING A Different channels and inputs will sometimes have this effect because the channel signal's own volume
CHANNEL OR is already loud. There is no way remove this completely. The TV has an AUTO VOLUME LEVEL
SOURCE CHANGES function that can combat this type of effect. Please make sure that function is turned on.
THE VOLUME
THERE IS NOISE OR When your TV's resolution is higher than the digital channel's broadcast resolution, the signal is
TRASH PIXELS ON up-converted to match your TV's resolution. Up-converting can cause this type of effect.
THE SCREEN
TIPS FOR HIGH The TV is an ideal platform for viewing High Definition Content. The best image quality can be
DEFINITION USERS achieved by HDMI, YPbPr (Component), then VGA.
practices, it is possible some image distortions can occur.
TIPS FOR LETTERBOX Letterboxed (Widescreen) versions of DVD movies are most commonly formatted for standard 4:3 TVs.
CONTENT USERS The TV has the capability of expanding this content so the entire screen is filled at the expense of the
image proportion. To use this function press the aspect button on the remote control and cycle among
the available options.
I CANNOT FIND THE The buttons are represented by the
VOLUME AND channels and
CHANNEL CHANGING
BUTTONS
TV TURNS OFF The TV features a power saving mode which will automatically turn off the TV, if there's no signal
AUTOMATICALLY provided for more than 5 minutes.
AFTER 5 MINUTES
MY TV PICTURE IS Check to see if you are under POWER SAVING mode for your picture mode. Keep pressing the
VERY DIM PICTURE button on the remote control to cycle out of POWER SAVING.
buttons located on the remote control.
changes the volume.
However, due to variances in broadcast
changes the