Start/Stop Button - Mercedes-Benz GLK 350 4MATIC Operator's Manual

Do not switch off the ignition while driving.
G
WARNING
If the parking brake has not been fully
released when driving, the parking brake can:
overheat and cause a fire
R
lose its hold function.
R
There is a risk of fire and an accident. Release
the parking brake fully before driving off.
! Warm up the engine quickly. Do not use
the engine's full performance until it has
reached operating temperature.
Only shift the automatic transmission to
the desired drive position when the vehicle
is stationary.
Where possible, avoid spinning the drive
wheels when pulling away on slippery
roads. You could otherwise damage the
drive train.
Key positions
SmartKey
To remove the SmartKey
g
(shift the transmission to position P)
Power supply for some consumers, such
1
as the windshield wipers
Ignition (power supply for all consumers)
2
and drive position
To start the engine
3
The steering is locked when you remove the
SmartKey from the ignition lock.
i
The SmartKey can be turned in the
ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not
switched on. The engine cannot be started.
KEYLESS-GO
General notes
Do not keep the KEYLESS-GO key:
R
with electronic devices, e.g. a mobile
-
phone or another SmartKey
with metallic objects, e.g. coins or metal
-
foil
inside metallic objects, e.g. a metal case
-
This can impair the functionality of the
KEYLESS-GO key.
Vehicles with KEYLESS-GO are equipped with
a SmartKey featuring an integrated KEYLESS-
GO function and a detachable Start/Stop
button.
The Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in the
vehicle.
Pressing the Start/Stop button several times
in succession corresponds to the different
key positions in the ignition lock. This is only
the case if you are not depressing the brake
pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts
immediately.
The Start/Stop button can be removed from
the ignition lock. Then, you can insert the
SmartKey into the ignition lock.
i
You do not have to remove the Start/Stop
button from the ignition lock when you
leave the vehicle. You should, however,
always take the SmartKey with you when
leaving the vehicle. The vehicle can be
started with the Start/Stop button if the
SmartKey is in the vehicle. Electrically
powered equipment can be operated.
I n f o r m a t i o n P r o v i d e d b y :
Driving
145
Z