Triumph Adler DC 2435 User Manual page 83

Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs Storing Jobs
Status
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX
Check New FAX
Device/
Paper/Supplies
Communication
10/10/2010 10:10
4
4-15
FAX Operation (Advanced)
2 Press [Device/Communication], and then
[Manual RX]. Reception will start.
NOTE:
When using a telephone set that can send
tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
page 4-16.)
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
When reception starts (when the Processing
indicator on the operation panel starts blinking),
return the handset to its original position.
4