Triumph Adler DC 2435 User Manual page 103

Forwarding Settings
FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add > Forward
Use this page to select forwarding destinations.
The settings available on the Forward page are shown below.
Item
Name
Status
Forwarding
File Format
FTP Encrypted TX
Subject Additional
Information
Page Separate
Number of Destination
Destination List
After completing the settings, click Submit to save the settings.
Description
Displays the condition name.
Displays whether the condition is currently used.
Specifies whether to forward.
Choose either PDF, PDF/A or TIFF as the file format used
for storing forwarded files.
Turn On to enable encryption for transmission. Note the
SSL protocol must also be turned on.
When a forwarding address is specified as destination,
Sender Name or Sender FAX No./ Address is appended
at forwarding. When None, these will not be appended.
Choose whether pages are separated when faxes are
forwarded to a computer.
Displays the number of registered destinations displayed
for the next item.
Specifies the FAX box to be used. When the selection
button is clicked, a list of registered FAX boxes appears.
For how to add a FAX box, specify the settings below.
• Add(Refer to Editing Destinations on page 4-36.)
• Import Contacts
• Import Groups
• Delete
4-35
FAX Operation (Advanced)
4