Sony DCR-SR220 Operating Manual page 111

78
T roubleslJooting
Troubleshooting
If
you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
• Overall operations/Easy Handycam
operation/Remote Commander 78
• Batteries/Power sources 79
• LCD screen 80
• "Memory Stick PRO Duo" 80
• Recording 80
• Playing back 82
• Playing back images stored on a "Memory
Stick PRO Duo" on other devices 83
• Editing images on your camcorder 83
• Dubbing/Connecting to other
devices 84
• Functions that cannot be used
simultaneously 84
Notes before sending your (am(order for
repair
• Your camcorder may require initializing
or changing the current hard disk of the
camcorder, depending on the problem. In this
case, the data stored on the hard disk will be
deleted. Be sure to save the data on the hard
disk (p.
37)
on other media (backup) before
sending your camcorder for repair. We will not
compensate you for any loss of hard disk data.
• During repair, we may check a minimum
amount of data stored on the hard disk in order
to investigate the problem. However, your Sony
dealer will neither copy nor retain your data.
• • A_ - - . ' •
j
OveralloperationslEasy
Handy~m
.
J
opera!ionlR~m~~~
• . •
~ 9mman~el':··
The power does not turn on.
• Attach a charged battery pack to the
camcorder (p. 13).
• Connect the plug of the AC Adaptor to the
wall outlet (wall socket) (p. 13).
• Set the camcorder onto the Handycam
Station securely (p. 13).
The camcorder does not operate even
when the power is set to on.
• It takes a few seconds for your camcorder
to be ready to shoot after the power is
turned on. This is not a malfunction.
• Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1
minute. If the functions still do not work,
press RESET (p. 101) using a sharp-pointed
object. (If you press RESET, all settings,
including the clock setting, are reset.)
• The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
• The temperature of your camcorder is
extremely low. Turn off the camcorder
and take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
Buttons do not work.
• During Easy Handycam operation, the
follOWing buttons/functions are not
available.
-
~(back
light) button (p. 28)
- Playback zoom (p. 33)
- To turn on and off the LCD backlight
(Pressing and holding DISP/BATT INFO
for a few seconds) (p. 19)
The
0..:
(OPTION) button is not
displayed.
• The OPTION MENU cannot be used
during Easy Handycam operation.
The menu settings have changed
automatically.
• During Easy Handycam operation, nearly
all the menu items will be automatically set
to the default settings.
• During Easy Handycam operation, some
menu items are fixed as follows.
- [REC MODE] : [SP]
- [DATA CODE] : [DATE/TIME]