Sony DCR-SR220 Operating Manual page 109

FADER
C!
You can record a transition with the
folloWing effects adding to the interval
between scenes.
CD
Select the desired effect in [STBY] (to fade in)
or [REe] (to fade out) mode, then touch
~.
®
Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step
<D.
If you press START/STOP, the setting is
canceled.
Fading in
WHITE FADER
Fading out
ON.
S~ appears on the screen.
To cancel, touch [OFF].
" Notes
• Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects.
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 73)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
.~.
Tips
• If you changed the battery pack, or moved your
camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
• If you change the [SCENE SELECTION]
settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
ral
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
" Notes
• Adjust the focus manually ([FOCUS], p. 73)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
COLOR SLOW SHTR
Q!F
(Color Slow Shutter)
" Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool
white fluorescent lamps.
• When you select [ONE PUSH], keep framing
white object while
t::.. • ..d
is flashing quickly.
• t::.. •
..d
flashes slowly if [ONE PUSH] could not be
set.
• When [ONE PUSH] was selected, if
t::.. • ..d
keeps
flashing after
touching~,
set [WHITE BAL.]
to [AUTO].
• When you set [WHITE BAL.], [SCENE
SELECTION] is automatically set to [AUTO].
, SUPER NIGHTSHOI
Q!J
The image will be recorded at a
maximum of 16 times the sensitivity of
NightShot recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 28) is also set to
BLACK FADER
....
76