Cisco TelePresence SpeakerTrack 60 Installation Manual page 16

Finishing up
• Move the two cameras into standby position as illustrated and carefully slide the cover
plate (a) on place.
• Use a cable management for a good aesthetic appearance.
• Connect the Ethernet and HDMI cables to the codec, see the codec documentation for
further information.
• Connect the power cable to the power mains.
78-100223-02C0 | MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
HDMI Ethernet Power
left
camera
HDMI
right
camera