Installation - Salvador Escoda MUCSW-16-HG Operation And Installation Manual

1) Package checking
1. Check the package to ensure no damage during transportation.
2. Open the package to check the unit and accessories, record the unit serial number.
3. Attention: to lift the unit by the four corners of unit body. Do not lift unit by the panel, condensate drain
pipe or the water connections.
WARNING
Do use the hooks as shown to lift up the unit!
Lifting the panel to move the unit is prohibited!
It may damage the unit!
2) Safety cautions
1. The unit should be installed in accordance with national wiring regulation.
2. Before installation, observe cautions in the manual and the labels attached on the unit.
Installation & servicing must be carried out by trained and qualified service personnel only!
Before carrying out any work, put the proper individual protection devices on.
Before carrying out any work, turn off the electric power supply.
3) Operation limits
1. Electric power supply: please refer to the label attached on the unit.
2. Minimum entering water temperature:
3. Maximum entering water temperature: +80 °C [176°F]
4. Maximum coil working pressure: 1.6 MPa
5. Maximum height off the ground: 3m

INSTALLATION

+2 °C [35.6°F]
14