Table of Contents
Advertisement
UPHOLSTERY AND BACK/SEAT CLOTH
PARTS:
1.
One Piece Backrest Complete
2.
One Piece Backpost
3.
Taptite Screw
4.
Upholstery Washer
5.
Seat Upholstery
6.
40cm High Back Upholstery
Tools Required:
No1 Phillips Screwdriver
INTRODUCTION
STEP 1
Check that the upholstery does not sag and is not unevenly stretched, torn or excessively
worn, paying attention to the adjustment features within the tension adjustable back
upholstery.
STEP 2
Check that all stitches are in good condition.
STEP 3
Check that all screws and washers are tight and free of sharp edges and burrs.
DISMANTLING
STEP 1
Remove all fixing screws and detach upholstery from tubework.
To re-assemble reverse above procedure ensuring that the fixing holes in the upholstery and
tubes are properly aligned.
NOTE:
TAKE CARE NOT TO OVER TIGHTEN SCREWS AS THIS MIGHT CAUSE BURRS.
Phoenix
11/01
6
3
4
2
2
3
5
1
Advertisement
Table of Contents
