Samsung HW-F350 User Manual page 19

AUTO POWER AUTO POWER AUTO POWER
HW-F350
REPEAT REPEAT DIMMER DIMMER
USB/ USB/
OPTICAL OPTICAL AUX AUX TV SOURCE TV SOURCE
HW-F355
AUTO POWER AUTO POWER SoundShare AUTO POWER SoundShare
REPEAT REPEAT
AUTO POWER AUTO POWER
HW-F350
REPEAT REPEAT DIMMER
TV VOL TV VOL TV CH TV CH AUDIO SYNC AUDIO SYNC
TV MUTE TV MUTE TV INFO TV INFO TV PRE-CH DIMMER TV PRE-CH DIMMER DIMMER
HW-F355
SOUND EFFECT SOUND EFFECT SMART VOLUME SMART VOLUME
HW-F350
TV VOL TV VOL TV CH TV CH AUDIO SYNC AUDIO SYNC AUDIO SYNC
HW-F355
TV MUTE TV MUTE TV INFO TV INFO TV PRE CH TV EXIT TV PRE CH TV EXIT
MUTE MUTE
LEVEL LEVEL
HW-F350
HW-F355
VOL VOL
3 3 D SOUND 3D SOUND 3
PLUS PLUS
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the
TV or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• The Auto power link function turns on and off each time you press AUTO POWER.
AUTO POWER LINK
ON
OFF
If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
Using the DIMMER function
This feature control the brightness of the Display.
Press DIMMER on the remote control of this unit.
Each time the button is pressed, the selection changes as follows :
DIMMER ON ➡ DIMMER OFF
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track is connected to
a digital TV. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC +/–. on the remote control of this unit.
• You can use the + , - buttons to set the audio delay time between 0 ms
and 300 ms.
In USB mode TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
LEVEL LEVEL
This feature balances the range between the loudest and quietest sounds.
DRC DRC DRC
You can use this function to enjoy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of this unit.
• Each time the button is pressed, the selection changes as follows :
DRC STANDARD ➡ DRC MAX ➡ DRC MIN
Display
POWER LINK ON
POWER LINK OFF
19