Samsung Crystal Surround Air Track HW-F450 User Manual

Samsung Crystal Surround Air Track HW-F450 User Manual

Active speaker system
Hide thumbs Also See for Crystal Surround Air Track HW-F450:

Advertisement

HW-F450
Crystal Surround Air Track
(Active Speaker System)

user manual

imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Crystal Surround Air Track HW-F450 and is the answer not in the manual?

Questions and answers

Michael Galle
April 26, 2025

Is this compatible with any wireless transmitter?

1 comments:
Mr. Anderson
May 14, 2025

No, the Samsung Air Track HW-F450 is not compatible with any wireless transmitter. It uses Bluetooth for wireless connection and must be paired specifically with compatible devices, such as certain Samsung TVs that support Bluetooth. Compatibility with other wireless transmitters is not guaranteed.

This answer is automatically generated

Culver Robinson
April 16, 2025

If I lost my remote for my subwoofer can I still set it up

1 comments:
Mr. Anderson
April 16, 2025

No, the Samsung Crystal Surround Air Track HW-F450 subwoofer cannot be set up without the remote. The setup process requires pressing the MUTE button on the remote control for 5 seconds while the main unit is in standby mode.

This answer is automatically generated

Vladimir Ananin
February 18, 2025

How can I connect the subwoofer to sound bar if I don't have the remote controll

1 comments:
Mr. Anderson
February 18, 2025

The Samsung Crystal Surround Air Track HW-F450 subwoofer connects wirelessly to the main unit. If the subwoofer is not connecting automatically, follow these steps to manually pair it without the remote control:

1. Turn off both the soundbar and subwoofer.
2. Plug in the subwoofer and soundbar to power.
3. Press and hold the ID SET button on the back of the subwoofer until the blue LED indicator starts blinking rapidly.
4. Turn on the soundbar. It should automatically search and connect to the subwoofer.
5. Check the subwoofer’s LED indicator. If it stays solid blue, the connection is successful.

If the LED indicator continues to blink, repeat the steps. Ensure the subwoofer is close to the soundbar during pairing.

This answer is automatically generated

This manual is also suitable for:

Ps-wf450Hwf-450

Table of Contents

Save PDF