Functional Description - Makita 9207SPB Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
003433
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Speed change
1
003437
For sanding operations, use the high-speed setting "H"
for maximum performance.
For polishing and buffing operations, use the low-speed
setting "L" for suitable speed range.
Refer to the following table for the relationship between
the switch setting and the rotating speed.
1. Switch trigger
2. Lock button
1
2
1. Speed change
switch
Speed setting min
H
L
013727
CAUTION:
Use the speed change switch only after the tool
•
comes to a complete stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing side grip (auxiliary handle)
010418
CAUTION:
Always be sure that the side grip is installed
•
securely before operation.
Screw the side grip on the tool securely. The side grip
can be installed on either side of the tool, whichever is
convenient.
Installing or removing the wool bonnet
003461
Mount the rubber pad onto the spindle. Screw the lock
nut onto the spindle.
To tighten the lock nut, hold the spindle with the wrench
so that it cannot revolve, then use the lock nut wrench
and securely tighten clockwise.
6
-1
(R.P.M)
4,100
2,000
1. Side grip
1
1. Wool bonnet
2. Lock nut
3. Rubber pad
1
2
3