Advertisement
1. Remove your camera.
2. Loosen the center column locking screw. Lower the column as far as it will
go, then tighten the locking screw.
3. Collapse the legs.
4. Press the leg release buttons, then push the legs in.
5. Store the tripod in the carry case.
Make sure that all leg locks are correctly tightened and that the legs are
•
fully open before use.
Do not carry or transport your tripod with camera equipment attached
•
(for example, over your shoulder or cradled in your arms).
Do not expose your tripod to excessive heat or cold, or use near any flame
•
or fire.
Do not oil or grease any part of the tripod.
•
Do not use any solvents or thinners to clean your tripod. Use only a mild
•
detergent and wipe dry with a soft, lint-free cloth.
Do not exceed the load limit of the tripod.
•
Maximum operating height: 168.9cm (66.5")
•
Minimum operating height: 56cm (22.1")
•
Folded height: 61.5cm (24.2")
•
Net weight: 2kg
•
Maximum operating load: 5kg
•
Number of leg sections: 4
•
Quick release thread: 1/4" (0.6cm)
•
Material: Aluminium alloy
•
4
Advertisement
