Advertisement
1. Open the flip-lever leg locks on each leg.
2. Extend the leg sections from the top down (thickest section first) to reach
the height you want.
3. Close the flip-lever leg locks on each leg.
: incorrectly securing a leg lock can cause the tripod leg to retract
unexpectedly and could result in damage to the tripod or to the attached
camera or camcorder.
4. Adjust the height of the center column by loosening the center column
locking screw, raising the center column to the height you want, then
tightening the locking screw.
5. To set the angle position of the legs, press the leg release buttons and lift
the tripod leg.
6. To remove the mounting plate, turn the quick-release plate locking knob
counter-clockwise to loosen it, then turn the quick-release plate locking
knob open. Then lift the mounting plate to remove it.
7. Align the bottom of your camera or camcorder with the 1/4" mounting
screw, then secure your camera or camcorder to the plate with the screw.
The screw should be tight.
8. To attach the mounting plate to your tripod, loosen the quick-release
plate locking knob, then slide the plate onto the tripod head. Tighten the
quick-release plate locking knob.
2
Advertisement
