Advertisement
1. To adjust your camera to the portrait position, loosen the vertical tilt lock
knob, rotate the plate up to 90°, then tighten the knob.
2. To adjust horizontal tilt, turn the pan locking knob counter-clockwise, tilt
the tripod head as desired, then tighten the handle.
3. To pan, turn the pan locking knob counter-clockwise, pan the tripod head,
then tighten the knob to lock in place.
: for maximum stability, always make sure that your camera lens is
over a leg.
4. To adjust the vertical tilt, loosen the vertical tilt handle, then use the
handle to adjust the vertical position. Tighten the vertical tilt handle.
1. Loosen the center column locking screw, then remove the center column /
monopod leg (with the pan head).
2. With one hand, grab all the twist screw leg locks on the monopod leg and
twist them counter-clockwise to loosen them.
3. Extend the leg sections, starting with the thickest section, to the height
you want.
4. Twist each leg lock clockwise to tighten it.
: incorrectly securing a leg lock can cause the monopod leg to
retract unexpectedly, which may result in damage to the monopod or the
attached camera or camcorder.
3
Advertisement
