Page 1
Tripod • Carry case • Quick Start Guide • Holds most camcorders and cameras that take a 1/4-20 mounting screw. • Removable center column can be used as a 58.7” monopod. • Ultra-fluid 3-way pan head for precise setting and smooth video. •...
Page 2
1. Open the flip-lever leg locks on each leg. 2. Extend the leg sections from the top down (thickest section first) to reach the height you want. 3. Close the flip-lever leg locks on each leg. : incorrectly securing a leg lock can cause the tripod leg to retract unexpectedly and could result in damage to the tripod or to the attached camera or camcorder.
Page 3
1. To adjust your camera to the portrait position, loosen the vertical tilt lock knob, rotate the plate up to 90°, then tighten the knob. 2. To adjust horizontal tilt, turn the pan locking knob counter-clockwise, tilt the tripod head as desired, then tighten the handle. 3.
Page 4
1. Remove your camera. 2. Loosen the center column locking screw. Lower the column as far as it will go, then tighten the locking screw. 3. Collapse the legs. 4. Press the leg release buttons, then push the legs in. 5.