Canon Pixma MG2500 Series Online Manual page 58

Even when printing with one ink only, print with leaving the empty FINE cartridge
installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an
error occurs and the machine cannot print.
For information on how to configure this setting, see
Used.
Color ink may be consumed even when printing a black-and-white document or when
black-and-white printing is specified.
Both color ink and black ink are also consumed in the standard cleaning and deep
cleaning of the print head, which may be necessary to maintain the performance of the
machine. When ink runs out, replace the FINE cartridge immediately with a new one.
Useful Information about Ink
1. Make sure that the power is turned on.
2. Retract the paper output tray and the output tray extension.
3. Open the cover.
The FINE cartridge holder moves to the replacement position.
Caution
Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the
FINE cartridge holder until it stops completely.
Important
The inside of the machine may be stained with ink. Be careful not to stain your
hands or clothing when replacing the FINE cartridge. You can easily wipe off the ink
from the inside of the machine with tissue paper or the like.
For details on the cleaning, refer to Safety and Important Information.
Do not touch the metallic parts or other parts inside the machine.
If the cover is left open for more than 10 minutes, the FINE cartridge holder may
move and the Alarm lamp light. In this case, close the cover, then open it again.
4. Remove the empty FINE cartridge.
Setting the Ink Cartridge to be
58