Sony MHC-GZR8D Operating Instructions Manual page 28

Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FUNCTION +/
repeatedly to select "DVD" (or
press DVD
2
Press
playback is stopped.
The Control Menu appears on the TV
screen.
3
Press  or 
select
ENTER
The options for "SETUP" appear.
4
Press  or 
select "CUSTOM, " then press
ENTER
The Setup Menu appears.
8
GB


on the unit).

DISPLAY when

repeatedly to
(SETUP), then press

.

repeatedly to

.
5
Press  or  
select "VIDEO SETUP, " then press

ENTER .
The options for "VIDEO SETUP"
appear.
6
Press  or  
to select "PROGRESSIVE
(COMPONENT OUT), " then press

ENTER .
The options for "PROGRESSIVE
(COMPONENT OUT)" appear.
7
Press  or  
select the desired setting, then

press ENTER
The default setting is underlined.
• OFF: Outputs interlace signals.
Select this setting when:
your TV does not accept

progressive signals.
your TV is connected to jacks

other than the COMPONENT
VIDEO OUT jacks.
• ON: Outputs progressive signals.
Select this setting when:
your TV accepts progressive

signals.
your TV is connected to the

COMPONENT VIDEO OUT
jacks.
When you select "ON, " the
confirmation display appears. Follow
the steps below.
repeatedly to
repeatedly
repeatedly to
.