Warning Mail Notification - Panasonic WJ-ND300 Operating Instructions Manual

Warning Mail Notification

The following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs.
ND300 (192.168.0.250) STATUS REPORT.
Time and date: 2005-1-1 12:00:00
STATUS: The description of the trouble will be displayed. (Ex. THERMAL ERROR)
Display
DATE
STATUS
HDD capacity warning
A warning mail with the <except FULL> content will be sent when the available disk space becomes less than the
set value for "Capacity warning" in the "Maintenance" menu. After a warning mail is sent, a warning mail with the
<except FULL> content will be sent each time 1% of the available disk space is reduced, and a warning mail with the
<FULL> content will be sent when there is no available disk space.
48
Description
Time and date when the trouble occurred will be displayed.
The description of the trouble will be displayed.
HDD Capacity warning*1:
Power outage detection:
Recover from a power outage:
NW camera trouble detection:
NW camera trouble recovery:
HDD smart warning:
HDD hour meter warning:
Remove auto links:
RAID5 recovery failure:
Fan trouble:
Thermal trouble:
NW Link error:
RAID1 down:
RAID2 down:
DHCP IP address lost:
<except FULL>
EVENT-HDD CAPACITY REMAINS ** %
COPY-HDD CAPACITY REMAINS ** %
** indicates the available disk space (%)
<FULL>
EVENT-HDD FULL
COPY-HDD FULL
POWER LOSS
POWER RECOVERD
CAM**COMMUNICATION ERROR
* indicates camera channel
CAM** COMMUNICATION RECOVERED
* indicates camera channel
HDDx-y DISK WARNING
x-y indicates disk number (sequential serial number)
HDDx-y HOUR METER WARNING
HDDx-y LOGICALLY REMOVED
x-y indicates disk number (sequential serial number)
HDDxRAID5 RECOVERY FAILURE
(X indicates unit number, Y indicates disk number)
FAN ERROR x-y
X indicates unit number, Y indicates fan number
THERMAL ERROR x-y
X indicates unit number, Y indicates sensor number
PORTx NETWORK LINK ERROR
x indicates network port number
HDDx-y RAID5 1DOWN
x-y indicates disk number (sequential serial number)
HDDx-y RAID5 2DOWN
x-y indicates disk number (sequential serial number)
PORTx DHCP ERROR
x indicates network port number