Editing A Sound; Tone - Kawai DP1 Owner's Manual

Editing a Sound

The 'EDIT' menu allows performers to adjust sound parameters. These adjustments can be saved as a
USER sound and immediately recalled at any time. The DP1 provides 12 USER sound memories.
Touch the MENU button labelled 'Edit' to enter the EDIT mode from the main screen. The MENU
button labels will change, allowing the performer to jump to 'Tone', 'EFX' and 'Settings' menus.
When DUAL/SPLIT mode is enabled, the The
and upper sounds.

1. Tone

Each sound has groups of 4 suitable parameters for adjusting the sound.
In the 'Edit Tone' screen, the performer can adjust more parameters than are available from the main
screen. The following is an example of adjustments to the 'Concert Grand 1' sound.
Editing Tone
Touch the MENU button labelled 'Tone'. The display shows the second group of adjustable parameters
for the current sound.
The advanced menu
Pedal Noise
Level
Key Thumps
Level
Touch the MENU button labelled 'Tone' once again. The display shows the third group of adjustable
parameters for the current sound.
Further adjustable parameter groups for the selected sound can be displayed by touching the
buttons labelled 'More', when available. Touch the 'Back' button to return to the previous screen. Touch
the 'Exit' button to return to the main screen.
MENU button switches the editable part between lower
Hammer Release
Level
Treble
Bass
MENU