Table of Contents
Advertisement
System Mode
Use this mode to set the System parameters of the DP1. The System Menu parameters are global, and
stored automatically upon leaving the 'SYSTEM' mode - it is not necessary to store these parameters
manually.
To enter the SYSTEM mode, touch the
following menus:
1. Master Parameters
Transpose
Key Vibration
Tune
This parameter sets the global master tuning of the DP1. The value step is 0.50Hz.
Touch Curve
This parameter adjusts the touch response curve of the keyboard.
Heavy+:
This Curve has a steep rise as velocity increases, and a
shallower curve at low velocities. (see 1) This curve
requires the most striking force to produce a loud
volume.
Heavy:
This curve requires a stronger striking force to produce
a loud volume. (see 2) This curve is perfect for those
with strong fingers.
Normal:
This curve recreates the touch response of an average
acoustic piano.
Light:
This curve requires less striking force to produce a loud
volume. (see 4) This curve is good for those still
developing finger strength.
Light+:
This curve requires the least amount of striking force to produce a loud volume. (see 5)
This curve is good for those with a very delicate touch.
Off:
This curve gives a constant velocity level no matter how hard the keyboard is struck. (see
6) This curve is suitable for sounds that have a fixed dynamic range such as
Organ,Harpsichord and certain synthesizer sounds.
User1,2:
You can create your own custom touch curve to fit your playing style. Two user touch
curves can be saved.
MENU button labelled 'System'. The display will show the
Tune
Touch Curve
Advertisement
Table of Contents
