Advertisement
ASSEMBLY INSTRUCTIONS
4. Connect the supply leads from the electrical box to the
fixture wire leads using the wire nuts (AA) (Fig. 4). The
black lead from the fixture pan (A) is spliced to the black
supply lead, and the white lead from the fixture pan (A) is
spliced to the white supply lead. Make sure the wire nuts
(AA) are tight. You can wrap electrical tape around the
wire nuts (AA) to prevent them from coming loose.
Carefully push the spliced wires back into the electrical
box.
Hardware Used
AA
Wire Nut
5. Position the fixture pan (A) over the electrical box so
that the threaded tube (DD) protruding from the
mounting bracket (EE) passes through the hole in the
back of the fixture pan (A). Secure the fixture pan (A) to
the electrical box with the finial cap (CC) (Fig. 5). Make
sure the fixture pan (A) is level. The fixture pan (A)
should be tight up against the wall surface.
Hardware Used
Threaded
DD
Tube
Finial
CC
Cap
6. Grasp the bulb (C) by the plastic base, and align the
pins on the bulb (C) with the socket (Fig. 6). Rotate the
bulb (C) clockwise approximately 1 /4 turn until the bulb
(C) base is secure in the socket.
7. Push the diffuser up, apply sufficient pressure to it
and rotate it clockwise until it screws in securely to the
pan (Fig. 7).
Restore power to the electrical box to make sure your
fixture is working properly.
4
x 2
5
DD
A
x 1
x 1
6
A
7
A
4
AA
AA
CC
C
C
B
Lowes.com
Advertisement
