Related Manuals for Yudor Outdoor Series
Summary of Contents for Yudor Outdoor Series
- Page 1 USER’S MANUAL SPEED DOME V07121-LM Outdoor Series Outdoor Series (360° Continuous Rotation) Vandal Proof Series Indoor Series...
-
Page 3: Safety Warning
Thanks for your purchase of our product. In order to make good use of this product, please read this user’s manual carefully. In order to use this product correctly and safely; be familiar with all operation steps. Please keep this user’s manual for future reference. ... -
Page 4: Table Of Contents
1.1 Indoor Series MISC [2/2] MENU 1.2 Vandal Proof Series 1.3 Outdoor Series 30.8 TRACKING MODE 1.4 Outdoor Series (360° Continuous Rotation) MISC [2/2] Move cursor to TRACKING MODE, press ENTER key to MASK C enter TRACKING MODE menu. 2. Installation... -
Page 5: Troubleshooting
30.5 MASK A / B / C / D 5.4.1.3 CRUISE 5.4.2 ALARM (Alarm Mode Setup) MISC [1/2] MASKING AREA SETTING Move cursor to MASK A/B, press ENTER key to enter 5.4.3 MASK H-REVERS V-REVERS MASK A/B menu. 5.4.4 AUTO TRACKING POSI/NEGA POSI PRIORITY... -
Page 6: Accessories
30.1 H-REVERS 1-Accessories MISC [1/2] Horizontal Reverse (Mirror) Function H-REVERS →OFF Please check if the accessories enclosed are completed. If there is any Move cursor to H-REVERS, press ENTER key to enter V-REVERS FREEZE ON/OFF menu. shortage, please contact your local dealer and replace a new one. POSI/NEGA POSI PRIORITY... -
Page 7: Vandal Proof Series
27. SCALE ZOOM SCALE DISPLAY 1.2 Vandal Proof Series SETUP MENU [5/5] Move cursor to SCALE, press ENTER key to enter ZOOM+AF SCALE ON/OFF menu. AF SLEEP Press UP or DOWN key to select ON/OFF. →SCALE The zoom scale will be display on right-down of the screen LANGUAGE ENGLISH in SCALE ON mode. -
Page 8: Outdoor Series
23. FOCUS SPEED 1.3 Outdoor Series SETUP MENU [4/5] FOCUS SPEED ADJUSTMENT DEFAULT CANCEL Move cursor to set FOCUS SPEED, press ENTER key to FREEZE FOCUS SPEED SELECTING menu, then Press UP or FREEZE MODE FIELD DOWN key to select MIN, +1, +2, +3, MAX (5 steps ZOOM SPEED adjustable). -
Page 9: Outdoor Series (360° Continuous Rotation)
19. DEFAULT 1.4 Outdoor Series (360° Continuous Rotation) SETUP MENU [4/5] RESTART THE CAMERA AND RESET PARAMETERS DEFAULT →CANCEL TO FACTORY’S DEFAULT. FREEZE Move cursor to DEFAULT, press ENTER key to enter FREEZE MODE FIELD DEFAULT CANCEL/OK menu. ZOOM SPEED... -
Page 10: Installation
2-Installation IR INT LEVEL Press ENTER key to enter IR INT LEVEL ADJUSTMENT menu. IR INT LEVEL →MAX 2.1 Indoor Series Press UP or DOWN key to select IR INT LEVEL MIN, +1, +2, +3, +4, +5, +6, +7, +8, +9, +11, +12, +13, +14, +15, +16, MAX, 2.1.1 Names of parts 18 steps adjustable. - Page 11 2.1.4 Install mounting plate Press ENTER key to enter MOTION FUNCTION menu. MOTION 2.1.4.1 Remove mounting plate Press UP or DOWN key to select motion detection AREA, →AREA Please turn mounting plate clockwise approximately 15° to separate the LEVEL (Sensitivity), TIME, OSD. LEVEL mounting plate and the base TIME...
- Page 12 2.1.5 Combine mounting plate with Speed Dome 14 H-GAIN Long aperture of mounting plate aim to point K (middle of two wire outlet) Turn This is used to enhance the compensation of the picture quality. Speed Dome clockwise approximately 15°, long aperture will meet wire outlet L. H-GAIN: Horizontal Compensation Make sure speed combine with mounting plate tightly.
-
Page 13: Vandal Proof Series
2.2 Vandal Proof Series 2.2.1 Names of parts POSITION LOAD Press ENTER key to enter POSITION LOAD SELECTNG A. Dome cover →1 POSITION LOAD menu. B. Base Press UP or DOWN key to select position (1 to 64 position that you want to LOAD), then press ENTER key that will be C. -
Page 14: Outdoor Series
2.3 Outdoor Series FOCUS Press UP or DOWN key to select FOCUS FAR to NEAR. 2.3.1 Names of parts A. Outer layer of base FAR - - - - - - - - - - - NEAR B. Base C. Cover D. -
Page 15: Digital Zoom
2.3.2.3 Loads cover back and tightened all securing screws (Turn clockwise). Make Press UP or DOWN key to select ZOOM WIDE to TELE, 1 to sure all the screws are properly tightened to keep camera waterproof ZOOM 23 times adjustable. 2.3.2.4 Use securing screws (accessory 1.3.9) and choice of Wall mount bracket (accessory 1.3.10) or Ceiling mount bracket (accessory 1.3.11) install camera WIDE - - - - - - - - - - - TELE... -
Page 16: Outdoor Series (360° Continuous Rotation)
2.4 Outdoor Series (360° Continuous Rotation) DOOR Move cursor to B-Y GAIN, press ENTER key to enter B-Y LEVEL MIDDLE GAIN ADJUSTMENT menu, then Press UP or DOWN key to 2.4.1 Names of parts R-Y GAIN select MIN, +1, +2, +3, +4, +5, +6, +7, MAX, 9 steps A. - Page 17 2.4.5 Assembling speed Dome with Bracket IN DOOR Move cursor to B-Y GAIN, press ENTER key to enter B-Y 2.4.5.1 Insert speed dome into round hole of bracket. LEVEL MIDDLE GAIN ADJUSTMENT menu, then Press UP or DOWN key to R-Y GAIN select MIN, +1, +2, +3, +4, +5, +6, +7, MAX, 9 steps 2.4.5.2 Lay on accessories 1.4.10 Waterproof spacer...
- Page 18 2.4.8 Basic Setup 2.4.8.1 Please connect power line, video, Infrared receiver first, Connect RS-485 AWB LEVEL Move cursor to B-Y GAIN, press ENTER key to enter B-Y control, alarm in and out if necessary. (Please refer to 3.4 Connection Chart AWB LEVEL MIDDLE GAIN ADJUSTMENT menu, then Press UP or DOWN key to...
-
Page 19: Cable Connection
3-Cable Connection ATW LEVEL Move cursor to B-Y GAIN, press ENTER key to enter B-Y ATW LEVEL MIDDLE GAIN ADJUSTMENT menu, then Press UP or DOWN key to 3.1 Indoor Series R-Y GAIN select MIN, +1, +2, +3, +4, +5, +6, +7, MAX, 9 steps →+4 B-Y GAIN adjustable. -
Page 20: Outdoor Series
3.3 Outdoor Series 6. AGC (Auto Gain Control) SETUP MENU [1/5] Move cursor to AGC, press ENTER key to enter AGC LEVEL CAMERA ID SELECTING menu, then Press UP or DOWN key to select SENSE UP BASE, +1, +2, +3, +4, +5, +6, +7, MAX (0dB ~ 36dB, 9 steps AISHUT AUTO. -
Page 21: Wire Specification
3.5 Cable specification: Press ENTER key to enter BLC AREA ADJUSTMENT menu. Power line: 18AWG-2C →BLC AREA Video cable: 5C2V(5CFB) 168 BLC LEVEL Alarm cable: 22AWG-4C Infrared receiver insulation cable: 22AWG-3C RS-485 PVC instrument cable (pair type): 22AWG-1P AREA AND LEVEL ADJUSTMENT MENU ※... -
Page 22: Infrared Remote Control
4-Infrared Remote control Press ENTER key to enter FIX LEVEL SELECTING menu, then Press UP or DOWN key to select OFF, 1/100, 1/120, 1/250, →OFF FIX LEVEL 1/500, 1/1000, 1/2000, 1/4000 or 1/10000. Clear / Camera ID Display key Camera selected key. Number key for Input camera ID /Function setting Alarm/subtitle display on or off FIX LEVEL ADJUSTMENT MENU... -
Page 23: Initial Programming
5-Initial Programming AISHUT Press ENTER key to enter AUTO LEVEL SELECTING menu, then Press UP or DOWN key to select MIN, +1, +2, +3, +4, +5, →+4 AUTO LEVEL Be sure to keep the remote control within 7 meters from the receiver. All +6, +7, MAX. -
Page 24: Load Default
※ There is no time limit on the process of camera ID setup Move cursor to POSITION, press ENTER key to enter ID ※ Default of camera ID is 〝 000. If you only use one camera you don’t have to setup CAMERA ID POSITION SELECTING menu. -
Page 25: Autopan
1. Camera Identification Setting ( CAMERA ID ) 5.4.1.1 AUTO PAN Select →AUTO PAN 001 SYSTEM SETUP Move cursor to CAMERA ID, press ENTER key to enter ID SETUP MENU [1/5] FUNCTION SELECTING menu, then Press UP or DOWN GROUP-SET AUTOPAN START-POINT: PAN LIMIT TO THE LEFT CAMERA ID... -
Page 26: Lens Internal Setting
5.4.1.3.1 RECORDING 12-Lens internal setting 1. Press END to start recording 001 SYSTEM SETUP 2. Use direction key to control camera to the spot CRUISE RECORDING need to be monitoring 3. When finish recording, press END to save SETUP MENU [1/5] SETUP MENU [2/5]... - Page 27 DELAY：Delay time setup, after finish delay time count down , camera will back to Reinforced wall Mount Bracket original status before alarm triggered. Easy installation Rigid and aesthetically designed BY SAT Delay time will automatically go with 5.4.4 TRACKING delay time ...
-
Page 28: Auto Tracking
5.4.3.2 SETUP POSITION AND SIZE OF MASKING 11-Optional accessories Enter SAVE, Use UP、DN key to adjust position 001 SYSTEM SETUP and size of masking. Exit SAVE to finish setup. MASK NO .1 MODIFY Multi-function keyboard →08 H-POS. H-POS. Horizontal position adjustment ... -
Page 29: Protocol
Vandal Proof Series: 186 x H142mm / 2.4Kg →SPEED From 2.5 ﾟ/sec to 160 ﾟ/sec Outdoor Series: 217 x H266mm / 3.44Kg AUTO-FLIP Outdoor Series (360): 210 x H269mm / 3.5Kg DEFAULT ENT. MIN, X1, X2, X3, X4, X5, X6, MAX Approval: CE, FCC, IP66 2.5 ﾟ... -
Page 30: Operation
5.4.7.2 AUTO-FLIP 9-Troubleshooting 001 SYSTEM SETUP AUTO-FLIP MISC 9.1 When no video image on the screen after successful mounting. Select→AUTO-FLIP SPEED 9.1.1 Make sure the video output connector of the camera is properly connected to →AUTO-FLIP DEFAULT ENT. the input of the monitor. 9.1.2 Double-check cable connections and the power supply. -
Page 31: Select Camera - By Input Camera Id
8-Maintenance & cleaning 6-Infrared Remote Control mode Daily cleaning 6.1 Select Camera - By Input camera ID Use a piece of soft and dry cloth to wipe off the dust from the dome cover. Dirt or scratch may influence focusing. 6.1.1 Press CAM then CALL ID<001-255>: - - - show on the screen. - Page 32 6.4 Preset positions Call, Save and Clear 7-RS-485 Control mode 6.4.1 Call Press PRE once then input camera ID CALL PRESET: - - 7.1 Initial Programming PRE→0→2 call preset 02 6.4.2 Save If camera needs to connect to DVR or control panel (KEY PAD) you need to setup Press PRE twice then input camera ID CALL PRESET: - - protocol match to DVR’s or control panel‘s protocol.