Yaesu FT-8500/mh-39 Manual page 70

68
o
With your 10 entered, you can repeat this proce-
dure to program the remaining code channels.
After 10 codes and settings are entered for each
code channel, press ~ to save the entry and exit.
17 : FHG I
nc
T>:: DELR. . . .
When calling stations using OTMF Paging or Code
Squelch, particularly through repeaters, some may
not receive your calls because their receiver squelch
is not opening fast enough (after receiving your
transmitted carrier) to allow all of the OTMF digits to
be decoded. To correct this problem, you can set a
longer delay (750 or 1000 rns) between the time the
transmitter is keyed and the first DTMF digit is sent.
o
Press.g to display the current Tx delay In millisec-
onds.
o
Press
B/:a
to select the desired delay, then
press
~
to save and exit.
18: Ht~S~·JER-E:HCI<
t·10DE
Two choices of automatic OTMF paging response
are available from this entry:
• Answer-Back - acknowledges a received page by
"paging back" the calling station (just as if you
manually selected their 3-digit code and pressed
the PIT).
• Page Forwarding - takes a received DTMF paging
string and re-transmits the original sequence
(rather than reversing the 10code pair as in anSWE
back format), relaying the call to extend your pagir
range.
D
Press ~ to display the current paging mode.
D
Press
8~
to select the
Fl·JD
or
Ht'~S-E:K,
the
press ~ to save and exit.
1'3: FHGEP
~~
I
t'K~EP
The ringer response to DTMF Paging calls depenc
on the configuration you select. Three types of DTM
ringer melodies are available:
• Beep Melody (factory-programmed)
• User-programmed Melody
• CW (Morse Code) Ringer
o
Press
~
to display the currently selected DTM
Paging ringer.
o
Press
8/0
to select the BEEF', U5EP or Cl
then press
~
to save and exit.
2~:::1 : FHG I t'~G HLEPT
The DTMF ringer can be enabled to sound only
once
or else repeat the selected melody (or Morse ar
nouncement) every minute until the PIT is pressec
D
Press ~ to display the current ringer alert.
D
Press
E)~
to select
5 I
t'K~LE
or
F.:EPEHT
I
the
press ~ to save and exit.