Table of Contents
Advertisement
Check back focus:
1.
Check macro is clicked back into the normal position.
2.
Check extender (if fitted) is
3.
Make the iris as
wide open
4.
Put the focus chart supplied in the kit at least 10 feet away from the camera
5.
Zoom in fully to the centre of the chart
6.
Focus to make it sharp.
7.
Zoom out all the way.
8.
Unscrew adjuster. May be silver or black.
9.
Rotate the back focus ring by a
for best focus.
10.
Go back to step 5 and check again until the best focus is obtained.
11.
Tighten adjuster
viewfinder as the adjuster is tightened, and look for any change in the
picture. If it changes, rotate and tighten the ring again.
Note
Use of a clear UV filter is recommended to avoid costly damage to the front of the camera lens
London & HQ: 02 26161 (Option 2)
Bristol: 01 47911
Salford: 01 60200
Production Support Online
Email: production.support@bbc.co.uk
Emergency Tech Support: 07786 171250
not
in the
2x
as possible, using ND's if needed.
very small amount
without rotating the back focus
position.
whilst looking
ring. Look into the
Advice
Support
■
Sony PMW 500
Operator guide
Page 16
Innovation
Production Support
■
Acquisition
Advertisement
Table of Contents
