Telnet - D-Link DSL-2740U User Manual

DSL-2740U Wireless N ADSL2+ Modem Router
User Manual

Telnet

On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
To disable access via TELNET, deselect the On checkbox and click the Apply button.
To enable access via TELNET again, select the On checkbox. In the Port field, enter the number of
the router's port through which access will be allowed (by default, the port 23 is specified). Then
click the Apply button.
Figure 104. The System / Telnet page.
Page 142 of 146
Configuring via Web-based Interface