Bridge Connection - D-Link DSL-2740U User Manual

DSL-2740U Wireless N ADSL2+ Modem Router
User Manual

Bridge Connection

In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), and
VLAN.
Figure 41. Configuring Bridge WAN connection.
Page 56 of 146
Configuring via Web-based Interface