Where To Put The Fd Terminal; Wi-Fi Signal Strength - First Data FD100 Quick Setup Manual

Fd wi-fi terminals

Hide thumbs Also See for FD100:

Table of Contents

Let's get started...

Typical set-up time: 20–30 minutes

Where to put the FD terminal

Place the terminal on a desk or tabletop. Avoid areas with

direct sunlight, objects that radiate heat, excessive dust and

other electrical devices that can cause excessive voltage.

There are certain environmental factors, such as concrete walls

and other devices that use the same frequency. These can have

an impact on the signal quality of the Wi-Fi network. If possible,

place your wireless access point in the center of the area you wish

to cover. Also, consider mounting Wi-Fi access points high on a wall

or ceiling, avoiding any obstructions that can impede Wi-Fi signals.

For best Wi-Fi performance, follow the access point manufacturer's

recommendations regarding location and positioning.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the FD100 and is the answer not in the manual?

Fd200 Fd300