Changing The Fuse In The Vehicle Power Cable - Garmin dezl 560 Owner's Manual

Changing the Fuse in
the Vehicle Power Cable
NOTICE
When replacing the fuse, do not lose
any of the small pieces and make
sure they are put back in the proper
position. The vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge
in your vehicle, you may need to
replace the fuse located at the tip of
the vehicle adapter.
dēzl 560 Owner's Manual
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
1. Use a coin to push down the
silver tip , and turn the coin
➊
counter-clockwise one-quarter
turn.
2. Remove the end piece
silver tip, and the fuse
3. Install a 2 A fast-blow fuse.
4. Verify that the silver tip is located
in the end piece.
5. Using a coin, replace the end
piece.
Appendix
, the
➋
.
➌
➌
➊
➋
73