Communication Setup - Sharp BD-HO52U Operation Manual

SETTINGS
Communication Setup
This allows you to perform and/or change the
communication setting. This setting is required to
use BD-LiVE functions, the RSS reader function and
software updates that connect to the internet.
~NOTE
• Make sure that the LAN cable is connected to this Player.
(See page 18.)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
- IP address, netmask, gateway, DNS address
• Besides, if specifying a proxy server, the following
information specified from your internet service provider is
also required. Confirm the information prior to the setting.
- IP address and port number of the proxy server
CJ
SETUP
1
Press SETUP to display the Menu screen.
2
Press J;./T
to select "Settings", then press ~ or
ENTER.
3
Press J;./T to select "Communication Setup",
then press
~
or ENTER.
4
Press ENTER, then press
J;./T
to select
"Change", and then press ENTER again.
• For initializing the current setting, select "Initialize",
then press ENTER.
@- 42
5 For setting the IP address, press .... /~ to select
"Yes" or "No", then press ENTER.
• If selecting "Yes"; The IP address is automatically
obtained.
• If selecting "No"; The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 44.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
6
Select "Next", then press ENTER.
• If selecting "Yes" in the step 5, go to the step 9.
7
Enter your DNS address.
• The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 44.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
S
Select "Next", then press ENTER.
9
For setting the proxy server, press .... /~ to
select "Yes" or "No", then press ENTER.
• If selecting "Yes"; The IP address or proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters. (See page 44.)
• If selecting "No"; Go to the next step.
10
Select "Next", then press ENTER.