Manual Update From Network - Sharp BD-HO52U Operation Manual

Table of Contents

Advertisement

SETTINGS
Manual Update from Network
This function allows you to perform the update
operation by accessing an internet connection
manually to check if there is a new firmware version.
~NOTE
• Make sure that he LAN cable is connected to this player.
(See page 18.)
• Make sure to perform the communication settings. (See
pages 42-44.)
• It may take time to access and download the update
depending on the internet connection and other factors.
©!
CAUTION
• 00 not remove the LAN cable or unplug the AC cord while
downloading or updating software.
o
SETUP
1
Press SETUP to display the Menu screen.
2
Press ./~ to select "Settings", then press ~ or
ENTER.
3
Press ./~ to select "Software Update
Settings", then press
~
or ENTER.
4
Press ./~ to select "Manual Update", then
press
~
or ENTER.
S
Press ./~ to select "Network", then press
ENTER.
6
During access to the network and checking the
latest version of firmware, "Accessing" blinks.
• The current version of this unit software and the latest
version of the update file on the network are displayed
when latest version of firmware has been found.
To update this player software with update file, select
"Yes", and go to step 7.
• If the firmware has already been updated to the latest
version, the following message appears.
If the internet connection has failed, an error message
appears.
Retry to perform the update after checking if the LAN
cable connection (page 18) and internet settings
(pages 42-44) are performed properly.
7
Press ENTER to start updating.
8
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, an error message appears.
Retry to perform the update after checking if the LAN
cable connection (page 18) and internet settings
(pages 42-44) are performed properly.
9
Press POWER to turn off the player.
e n
CD
:::
S'
<C
VJ
@-
47

Advertisement

Table of Contents
loading

Table of Contents