Schippmann CS-8 Series Owner's Manual page 4

CS-8 Series PHS-28 Rev1.01, Dec. 2013
PREFACE
First of all, congratulations on the purchase of this 3U euro rack synthesizer
module. This manual contains a condensed description of the functionality
and addresses users with a certain level of elementary technical knowledge.
The PHS-28 is a very versatile and fully analogue voltage controlled 2 channel
phaser (phaseshifter) with 8 stages per channel. The channels are cascadable
to a true 16 stage phaser with a feedback loop over all 16 stages by one
switching click. Very deep and impressive phasing effects are possible with
that. The stage for the feedback as well as for the output stage are selectable
fully independently. We think that the PHS-28 convinces with an unbelievable,
warm forceful sound - it would have bitten almost our head off! The module is
designed with a width of 19 PU (part units, 1 PU=5.08mm) for installation into
a 3 HU (height units) modular rack with a built in ±12 V power supply.
Furthermore the module is equipped with lots of CV (Control Voltage) inputs
for phase frequency (FREQ), resonance (RESO) and emphasize (EMPH),
separately for each channel that true and independent dual audio operating is
possible.
Design and implementation meet highest technical standards concerning
usability, sound quality, and electromagnetic immunity. The entire design and
production work was done in Germany.
Made in Germany
-2-