Samsung SNP-3120 User Manual page 136

setup screen
Upgrade / Reboot
1. From the Setup menu, select the
<System (
2. Click <Upgrade / Reboot>.
3. Select a desired item and set it
appropriately.
• Upgrade : Performs upgrading the
system.
• Factory default : Resets the system
to the factory default.
- Except network parameter : Reset the other settings except for Network settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)

The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
found, the previous settings will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration. (When you perform PTZ operations, you cannot backup or
recover the previous settings.)
• Restart : Restarts the system.
To perform the upgrade
1. Click [Upgrade].
2. Click [Browse] and specify a file to
upgrade.
3. Click [Send].
4. The "Upgrade" dialog appears where
the progression will be shown in the
bottom.
5. Once completed upgrading, the
browser exits and the camera restarts.
136_ setup screen
)> tab.