Table of Contents
Advertisement
7.23.3 Engine governor and connector – Cleaning
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Solvent (isopropyl alcohol)
Note:
Always use test connectors to enter the connectors. Never use test leads for this purpose. Otherwise
the contacts could be bent.
Engine governor and connector – Cleaning
1.
Use isopropyl alcohol to remove coarse dirt from housing surface.
2.
Use isopropyl alcohol to remove dirt from the connector and cable surfaces.
3.
Check legibility of cable labels. Clean or replace illegible labels.
Heavily contaminated connectors on engine governor – Cleaning
Note:
Close connectors that are not plugged in with the protective cap supplied.
1.
Release the latch and pull off connector.
2.
Use isopropyl alcohol to clean connector housings, connector socket housings and all contacts.
3.
When connectors, sockets and all contacts are dry: Fit connectors and latch.
164 | Task Description | MS150096/03E 2015-04
Part No.
Qty.
X00058037
1
Hide quick links:
Advertisement
Table of Contents
