Engine Oil Filter – Replacement - MTU 12V4000T94 Operating Instructions Manual

7.16 Oil Filtration / Cooling
7.16.1 Engine oil filter – Replacement
Preconditions
☑Run engine to reach operating temperature.
Special tools, Material, Spare parts
Designation / Use
Filter wrench
Engine oil
Oil filter
Sealing ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Engine oil filter – Replacement
1. Stop engine and disable engine start.
2. After warning up and directly stopping the
engine, open the vent plug (1) on the oil
heat exchanger.
3. Wait 5 minutes until the oil system is vent-
ed and the oil has drained off.
Note: Always use a new sealing ring for the vent plug.
4. Screw the vent plug (1) back in.
Name
Screw
134 | Task Description | MS150096/03E 2015-04
Size Type
M14 Tightening torque
Part No.
F30379104
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Lubricant Value/Standard
(Engine oil) 35 Nm +4 Nm
Qty.