Hitachi CP-X2530WN User Manual page 71

Item
WIRELESS
SETUP
(continued)
(continued on next page)
Use the ▲/▼
buttons to select the
SSID to display the
SSID menu.
#1 DEFAULT ó #2 DEFAULT ó #3 DEFAULT
Select one of the DEFAULT (#1~#4) and press ►
or ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when the # 5
CUSTOM is selected. The SSID #5 CUSTOM
menu will be appeared.
(1) The current SSID will be displayed on the
first line. If not yet written, the line will be blank. Use
the ▲/▼/◄/► buttons and the ENTER or INPUT
button to select and enter characters. To erase 1
character at one time, press the RESET button or
press the ◄ and INPUT button at the same time.
Also if you move the cursor to DELETE or ALL
CLEAR on screen and press the ENTER or INPUT
button, 1 character or all characters will be erased.
The SSID can be input up to 32 characters.
SSID
(2) To change an
already inserted
character, press
the ▲/▼ button to
move the cursor
to one of the first
2 lines, and use
the ◄/► buttons
to move the cursor
on the character to
be changed. After
pressing the ENTER
or INPUT button,
the character is
selected. Then,
follow the same
procedure as
described at the
item (1) above.
(3) To finish entering text, move the cursor to the OK on
screen and press the ►, ENTER or INPUT button.
To revert to the previous name without saving
changes, move the cursor to the CANCEL on screen
and press the ◄, ENTER or INPUT button.
Description
#5 CUSTOM ó #4 DEFAULT
NETWORK menu
71