Hitachi CP-X2530WN User Manual page 114

Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Sound does
not come out.
No pictures are
displayed.
(continued on next page)
114
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the audio cables.
The MUTE function is working.
Restore the sound pressing MUTE or VOLUME +/-
button on the remote control.
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu
function or the remote control.
The AUDIO SOURCE/SPEAKER setting is not correct.
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.
The Sound button (♪) or checkbox is disabled.
If you have selected USB TYPE A, turn the sound on
from the Thumbnail menu.
If you have selected USB TYPE B, remove the check
mark from the Sound checkbox in the Options window of
"LiveViewer Lite for USB".
If you have selected LAN, remove the check mark from
the Sound checkbox in the Option menu of "LiveViewer".
The lens cover is attached.
Remove the lens cover.
The signal cables are not correctly connected.
Correctly connect the connection cables.
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu function.
The computer cannot detect the projector as a Plug-
and-Play monitor.
Make sure that the computer can detect a Plug-and-Play
monitor using another Plug-and-Play monitor.
The BLANK screen is displayed.
Press BLANK button on the remote control.
The USB TYPE B port is selected as the picture input
source even if MOUSE is selected for USB TYPE B.
Select USB DISPLAY for USB TYPE B in OPTION menu
to project the picture input to the port. Otherwise select
other port for picture input.
Reference
page
12 ~ 15
23
23, 49
49
88, 98,
102
4
12 ~ 15
36
11
31
57