Cleaning And Replacing The Air Filter - Hitachi CP-X2530WN User Manual

Cleaning and replacing the air fi lter
Please check and clean the air fi lter periodically. When the indicators or a
message prompts you to clean the air fi lter, comply with it as soon as possible.
Replace the fi lter when it is damaged or too soiled. To prepare the new fi lter, make
contact with your dealer and tell the following type number.
Type number : UX38841 (Filter set)
When you replace the lamp, please replace the air fi lter.
An air fi lter of specifi ed type will come together with a
replacement lamp for this projector.
1.
Turn the projector off, and unplug the power cord.
Allow the projector to suffi ciently cool down.
2.
Use a vacuum cleaner on and around the fi lter
cover.
3.
Pick and pull up the fi lter cover knobs to take it off.
4.
Use a vacuum cleaner for the fi lter vent of the
projector.
5.
Take the fi lter out while holding the fi lter cover.
6.
Use a vacuum cleaner on both sides of the fi lter.
If the fi lter is damaged or heavily soiled, replace it
with the new one.
7.
Place the fi lter back into the fi lter cover, making sure
the plastic band is on the upper side.
8.
Install the fi lter unit back into the projector.
(continued on next page)
Maintenance
Filter cover
Filter cover knobs
Intake vent
Plastic band
2
3
4
7
105