Hitachi CP-X2530WN User Manual page 112

Troubleshooting
Regarding the indicator lamps (continued)
POWER LAMP
indicator indicator
Blinking In
Green for Turned
approx. 3 off
seconds.
Lighting
Lighting
In Orange In Red
Blinking Blinking
In Orange In Red
Turned Turned
off off
NOTE
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, please make
confirmation of the attachment state of the lamp and lamp cover, and then turn
the power on again.
or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH (60).
Otherwise, set it to NORMAL.
112
TEMP
indicator
At least 1 Power ON schedule is saved to the
Turned projector.
off Please refer to Schedule Settings in the Network
Guide.
Lighting Loading the saved data of CLONING on STANDBY
In Red MODE.
Loading the saved data of CLONING has failed on
Blinking
STANDBY MODE.
In Red
Please refer to CLONING (64 ~ 66).
Turned Loading the saved data of CLONING has succeeded
off on STANDBY MODE.
If the projector is used at an altitude of about 1600 m (5250 feet)
Description