Introduction / Technical Data - Whynter RPD-711DWP Instruction Manual

INTRODUCTION
How it Works
When the dehumidifier is started, the fan begins to pull moisture -laden air across the dehumidifying coils.
The coils condense or draw moisture from the air, and air flows through the top louver into the room as dry,
warm air. Moisture removed from air is collected in a drain bucket on the front of the dehumidifier.
The appliance is designed to operate between 41°F (5°C), and 96°F (35°C). The "Compressor" circuit has
an automatic 3 minute time delayed start if the appliance is turned off and on quickly. This prevents over-
heating of the compressor and possible circuit breaker tripping. Make sure the drain bucket is fitted correctly
otherwise appliance will not turn on.
Energy Saving Guide
This Whynter dehumidifier is an Energy Star rated appliance. Follow the guide below can help to get the
best performance and efficiency from your dehumidifier.

Do not cover the air intake and outlet.

Do not place the appliance in front of curtains or drapes - to ensure they do not obstruct the air intake.

Keep curtains, blinds or drapes closed during the sunniest part of the day.

Close all windows and doors.

Indoor relative humidity should ideally be kept between 35%RH and 60%RH depending on the ambient
temperature.

Make sure the appliance is on a hard and level surface.

To prolong the compressor's life, please wait at least 3 minutes before turning the appliance back on
after shutting it off.

Inspect and keep the air filter clean by cleaning regularly.

Perform routine maintenance.
Dehumidifying capacity
Drain Bucket capacity
EEV (Liters per kW-Hour)
Maximum power input
Current Consumption
TECHNICAL DATA
MODEL :
Power supply
Refrigerant
Air flow M3/H / CFM
Fan speeds
Unit Dimensions
Unit Net Weight
Unit Gross Weight
Noise Level (dBA)
RPD-711DWP
70 pints
13 pints
1.85 L/kWh
115 V /60 Hz
915 Watts
4.6 Amps
R410A/8.11oz
335 m3/h / 197 CFM
16.1" W x 11.7" D x 24.3" H
38.6 lbs
40.3 lbs
< 55 dBA
5
2