Do you have a question about the RPD-702WP and is the answer not in the manual?
Questions and answers
Gary
March 24, 2025
how do you get the unit to run with continuous drainage
1 comments:
Mr. Anderson
March 24, 2025
To set up continuous drainage for the Whynter RPD-702WP dehumidifier, follow these steps:
1. Gravity Drainage Method: - Unscrew and remove the drain cover at the rear of the appliance. - Remove the soft rubber stopper and store it in the water bucket. - Insert the supplied 3 ft. drain hose through the hole of the drain cover. - Connect the drain hose to the drain port. - Tighten the drain cover in a clockwise direction onto the rear of the appliance. - Place the water bucket back in its original position.
2. Water Pump Drainage Method: - Firmly insert the supplied 16.5 ft. water pump hose into the outlet. - Ensure you hear a click sound to confirm proper attachment. - Place the other end of the hose in a floor drain. - Ensure the water bucket is empty or not full, as the water pump will not activate otherwise.
Note: Some water may still collect in the water bucket during continuous drainage.
WHYNTER 70 PINT RESIDENTIAL PORTABLE DEHUMIDIFIER WITH BUILT-IN PUMP Model # : RPD-702WP INSTRUCTION MANUAL Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
We trust that your Whynter dehumidifier will provide the performance and reliability that we stand for. Your Whynter dehumidifier is designed to remove moisture in the air by con- densation removal and collecting the condensation water in the internal water bucket or draining through a drain hose.
TABLE OF CONTENTS PAGE DISPOSAL INFORMATION I. SAFETY PRECAUTIONS II. INTRODUCTION III. PARTS AND CONTROLS IV. OPERATION INSTRUCTIONS 7 - 8 V. CONTINUOUS DRAINAGE VI. MAINTENANCE VII. TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER VIII. TROUBLESHOOTING 12 - 13 WARRANTY INFORMATION...
I. SAFETY PRECAUTIONS TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WARNING WHEN USING YOUR PORTABLE DEHUMIDIFIER, FOLLOW THESE BASIC PRECAUTIONS: Read all instructions before using the appliance Never clean appliance parts with flammable fluids. The fumes can create a fire hazard. Do not use an exces- sively wet cloth, industrial solvents, and oil-based products to clean this appliance ...
Make sure the water bucket is fitted correctly otherwise appliance will not turn on. Energy Saving Guide This Whynter dehumidifier is an Energy Star rated appliance. Follow the guide below can help to get the best performance and efficiency from your dehumidifier. ...
III. PARTS AND CONTROLS Auto Shut Off Set the desired time delay OFF hours by pressing the UP and DOWN and buttons. The time increments are When the selected humidity level is reached, the dehu- 1 hour up to 24 hours. When the delay time set has midifying function will shut off automatically elapsed, the appliance switches off.
IV. OPERATION INSTRUCTIONS AIR FILTERS INSTALLATION Your Whynter portable dehumidifier is equipped with a removable and washable filter. The filter removes large particles such as dust, pet hair and dander. WARNING: NEVER OPERATE THE DEHUMIDIFIER WITHOUT THE FILTER START OPERATION 1.
IV. OPERATION INSTRUCTIONS POSITIONING THE UNIT This dehumidifier is intended for indoor residen- tial applications only and should not be used for commercial or industrial applications. Place the dehumidifier on a smooth, hard and level floor strong enough to support the appli- ance with a full bucket of water.
V. CONTINUOUS DRAINAGE WATER PUMP METHOD One of the key features of this unit is that it has a water pump that pushes water up or over a longer distance. Us- ing this feature will enable your unit to run maintenance free, and you will no longer have to empty a heavy reser- voir filled with water or worry about draining your unit using gravity.
VI. MAINTENANCE ALWAYS turn off and unplug the dehumidifier before cleaning. 1. Cleaning the air grille and main unit Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chem- icals or abrasives.
4. Humid climates In humid climates, such as areas near a beach or large body of water, your Whynter RPD- 702WP portable dehumidifier can help keep the environment in your home at a more comfortable level.
VIII. TROUBLESHOOTING Problem Possible Causes Solutions The dehumidifier does not Power failure / outage. Restore the power supply. The automatic switch, line fuse, Flip the switch / change the fuse / turn the operate or breaker has been tripped. breaker back on.
VIII. TROUBLESHOOTING - ERROR CODES Error Code Reason “30%RH” Humidity Sensor has an open circuit or humidity is less than 30% “90%RH” Humidity Sensor has short circuit or humidity is higher than 90% Temperature is lower than 32°F or temperature sensor has an “Lo”...
(within two months of purchase; after two months to one year, cus- tomer will be responsible for freight cost to Whynter’s service department), along with an explanation of the claim to Whynter LLC. Please package the portable dehumidifier carefully in its original packaging material to avoid damage in transit.
Need help?
Do you have a question about the RPD-702WP and is the answer not in the manual?
Questions and answers
how do you get the unit to run with continuous drainage
To set up continuous drainage for the Whynter RPD-702WP dehumidifier, follow these steps:
1. Gravity Drainage Method:
- Unscrew and remove the drain cover at the rear of the appliance.
- Remove the soft rubber stopper and store it in the water bucket.
- Insert the supplied 3 ft. drain hose through the hole of the drain cover.
- Connect the drain hose to the drain port.
- Tighten the drain cover in a clockwise direction onto the rear of the appliance.
- Place the water bucket back in its original position.
2. Water Pump Drainage Method:
- Firmly insert the supplied 16.5 ft. water pump hose into the outlet.
- Ensure you hear a click sound to confirm proper attachment.
- Place the other end of the hose in a floor drain.
- Ensure the water bucket is empty or not full, as the water pump will not activate otherwise.
Note: Some water may still collect in the water bucket during continuous drainage.
This answer is automatically generated