TomTom Rider Reference Manual page 9

Do not overtighten nuts and screws. You may crack parts of the mount kit or damage your

handlebars if you overtighten nuts or screws.
If you are using the U-bolt, don't forget to put the provided rubber caps over the exposed

threads.
Important: Damage due to modifications, improper installation, road hazards or accidents, are
not covered. Neither RAM nor TomTom shall be liable for any injury, loss, or damage, direct or
consequential, arising out of improper installation, or inability to use the product. Before use,
the user shall determine the suitability of the product for its intended use. The user assumes
all risk and liability, whatsoever, in connection with the mount.
3. Place your TomTom Rider in the holder.
4. You can rotate your device by ninety degrees to get your preferred view.
9