Page 1
HOW TO PAIR A TOMTOM RIDER 2 EDITION TO A SCHUBERTH SRC COMMUNICATION SYSTEM This note was written in case it helps enyone else is struggling to pair a TomTom Rider 2 Edition unit with a Schuberth SRC systems mounted inside C3Pro Helmets.
Page 2
(3) TAP “Right arrow enough times to reach the “connect to headset” option. (4) TAP “Connect to headset” (5) IF THERE IS ANY OTHER HEADSET LISTED then CHOOSE “no” to force the TomTom Rider 2 Edition to enter the pairing process for a new headset The next step is to determine which type of SRC collar is fitted to your Schuberth helmet to make sure we follow the correct pairing process on the helmet collar.
Page 3
SRC using the SRC v4.20 headset protocol. (5) You should now hear a “GPS Connected” message from the Helmet speakers (6) Now check the pairing is working by scrolling through the menu on the TomTom Rider 2 edition to the “adjust sound level”...
Page 4
If they are muffled then you may need to adjust the speaker placement within the helmet lining so they align with your ears. (8) You may also want to adjust the volume on the Tomtom Rider 2 Edition to the maximum loudness level –...