Confirm Or Remove A Speed Trap; Updating Locations For Cameras And Hazards - TomTom Rider Reference Manual

2. Select Report Safety Camera.
You see a message thanking you for adding the camera.
Tip: If you make a mistake when reporting a camera, select Cancel in the message.
The safety camera is saved on your Rider automatically and also sent to other users.

Confirm or remove a speed trap

You can confirm the presence of a speed trap or remove a speed trap if it is no longer present.
1. Just after you pass a speed trap, in the route bar you are asked if the camera was still there.
2. Select Yes if the speed trap is still there.
3. Select No if the speed trap has been removed.
If you select No, the speed trap is removed from your map.

Updating locations for cameras and hazards

The locations of safety cameras can change frequently. New cameras can also appear without
warning and the locations for other hazards, such as accident hotspots, may also change.
When connected to TomTom
mobile camera locations in real time. You do not need to do anything to receive updates – they are
sent to your Rider automatically.
services, your TomTom Rider receives all camera updates for fixed and
103