Installation Of The Appliance - J. A. Roby GRIZZLY Owner's Manual

INSTALLATION OF THE APPLIANCE

1- Fix the plenum to the appliance with
12 screws.
2- Fix the trapdoor in front of the
furnace, on the rectangular box with 2 screws.
3- Fix the front cover in front of the
furnace with 4 screws.
4- Fix the wire support on the side of the
furnace with 2 screws.
5- Fan installation
-Remove the fan box cover (4 screws).
-Remove the steel plate if it's not already
made.
Install the bolt and the nuts (4). Insert the bolt
through the hole of the fan and the fan box.
Screw the nuts with bolt (Pass arm in
rectangular hole)
18