Advanced Settings - Luxul XWR-600 Quick Install Manual

XWR-600
WPS CONFIGURATION/RESET BUTTON
Used to configure WPS (Wi-Fi Protected Setup) or restore factory default settings
To configure WPS, press and hold the WPS/Reset button until the WPS LED
w
turns on (typically about 5 seconds). The XWR-600 is now in WPS pairing
mode. Follow the pairing instructions for your client device and enter the
XWR-600 WPS pin number (12345678) when prompted.
CAUTION: Holding the WPS button longer than 10 seconds will result
CAUTION: For optimal security, it is recommended to disable WPS
To reset to factory defaults, press and hold the WPS/Reset button until the
w
System LED stops flashing (approximatly 20 seconds). A factory reset will take
one minute or more to complete. A successful factory reset is indicated when
all of the Port LEDs flash once. When the System LED starts flashing again the
unit is ready.
CAUTION: Resetting the XWR-600 to factory defaults will remove all
NOTE: To hard reboot the router, remove the power adapter. Wait 10
seconds and re-apply power.

ADVANCED SETTINGS

For login and advanced settings information go to luxul.com
8
in a factory reset
after your client devices have been configured.
custom settings.
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
Quick Install Guide
LUX-QIG-XWR-600 0828141127